When overheated Lithium-ion (Li-ion) batteries are prone to catching fire or even exploding. Yet they are used to power everything from smart watches to electric vehicles, thanks to the large amounts of energy they can store in small spaces.

A recent research paper published in American Chemical Society’ Nano Letters offers a possible solution with a new technology that can swiftly put the brakes on a Li-ion battery, shutting it down when it gets too hot.

The chemistry found in many batteries is essentially the same: Electrons are shuttled through an electronic device in a circuit from one electrode in the battery to another. But in a Li-ion cell, the electrolyte liquid that separates these electrodes can evaporate when it overheats, causing a short circuit.

In certain cases, short circuiting can lead to thermal runaway, a process in which a cell heats itself uncontrollably. When multiple Li-ion cells are wired together – such as in electric vehicles – thermal runaway can spread from one unit to the next, resulting in a very large, hard-to-fight fire.

To prevent this, some batteries now have fail-safe features, such as external vents, temperature sensors or flame-retardant electrolytes. But these measures often either kick in too late or harm performance.

So, Yapei Wang, Kai Liu and colleagues at Tsinghua and Renmin Universities in Beijing China wanted to create a Li-ion battery that could shut itself down quickly, but also work just as well as existing technologies.

Lithium ion hot self shutdown technology. In the lower right box the copper foil breaks opening the circuit. Image Credit: American Chemical Society. Click either link, the press release or study paper for more images.

The researchers used a thermally-responsive shape memory polymer covered with a conductive copper spray to create a material that would transmit electrons most of the time, but switch to being an insulator when heated excessively.

At around 197° F, a microscopic, 3D pattern programmed into the polymer appears, breaking apart the copper layer and stopping the flow of electrons. This permanently shuts down the cell but prevents a potential fire. At this temperature, however, traditional cells kept running, putting them at risk of thermal runaway if they became hot again. Under regular operating temperatures, the battery with the new polymer maintained a high conductivity, low resistivity and similar cycling lifetime to a traditional battery cell. The researchers say that this technology could make Li-ion batteries safer without having to sacrifice their performance.

The authors acknowledge funding from the National Natural Science Foundation of China, the Tsinghua University-China Petrochemical Corporation Joint Institute for Green Chemical Engineering and the Tsinghua-Foshan Innovation Special Fund.


This news seems on the surface to be really good news. For a battery experiencing a rapid internal heating this looks like a great idea. What is not in your humble writer’s experience is what share of lithium ion battery fires are from internal heating versus punctures, crushing, dendrites, salt water soaks and the rest. If the battery is internally shorted your writer isn’t seeing the new application technology offering much defense.

Ran a search of “lithium ion battery fire causes”. A cursory look suggests that “most” lithium ion battery fires come from “internal overheating” without the cause of the overheating specified in detail. The National Fire Protection Association report is now over 6 years old. We remain in a very ill informed state.

Lithium ion battery fires are not common. Almost “rare”, but not really rare. If one goes off on you there is a catastrophe in progress. That makes this team’s idea:

Very Welcome Indeed!!


Name (required)

Email (required)


Speak your mind