University of Houston researchers have reported a significant breakthrough with a new oxygen evolution reaction catalyst that, combined with a hydrogen evolution reaction catalyst, achieved current densities capable of supporting industrial demands while requiring relatively low voltage to start seawater electrolysis.

Seawater is one of the most abundant resources on earth, offering promise both as a source of hydrogen – desirable as a source of clean energy – and of drinking water in arid climates. But even as water-splitting technologies capable of producing hydrogen from freshwater have become more effective, seawater has remained a challenge.

Schematic illustration of the synthesis procedures for the self-supported 3D core-shell NiMoN@NiFeN catalyst. Image Credit: University of Houston. Click image for the largest view.  More photos at the study link below.

Researchers say the device, composed of inexpensive non-noble metal nitrides, manages to avoid many of the obstacles that have limited earlier attempts to inexpensively produce hydrogen or safe drinking water from seawater.

The work is described in Nature Communications.

Zhifeng Ren, director of the Texas Center for Superconductivity at UH and a corresponding author for the paper, said a major obstacle has been the lack of a catalyst that can effectively split seawater to produce hydrogen without also setting free ions of sodium, chlorine, calcium and other components of seawater, which once freed can settle on the catalyst and render it inactive. Chlorine ions are especially problematic, in part because chlorine requires just slightly higher voltage to free than is needed to free hydrogen.

The researchers tested the catalysts with seawater drawn from Galveston Bay on the Texas coast. Ren, M.D. Anderson Chair Professor of physics at UH, said it also would work with wastewater, providing another source of hydrogen from water that is otherwise unusable without costly treatment.

Anderson pointed out, “Most people use clean freshwater to produce hydrogen by water splitting,” he said. “But the availability of clean freshwater is limited.”

To address the challenges, the researchers designed and synthesized a three-dimensional core-shell oxygen evolution reaction catalyst using transition metal-nitride, with nanoparticles made of a nickel-iron-nitride compound and nickel-molybdenum-nitride nanorods on porous nickel foam.

First author Luo Yu, a postdoctoral researcher at UH who is also affiliated with Central China Normal University, said the new oxygen evolution reaction catalyst was paired with a previously reported hydrogen evolution reaction catalyst of nickel-molybdenum-nitride nanorods.

The catalysts were integrated into a two-electrode alkaline electrolyzer, which can be powered by waste heat via a thermoelectric device or by an AA battery.

Cell voltages required to produce a current density of 100 milliamperes per square centimeter (a measure of current density, or mA cm-2) ranged from 1.564 V to 1.581 V.

The voltage is significant, Yu said, because while a voltage of at least 1.23 V is required to produce hydrogen, chlorine is produced at a voltage of 1.73 V, meaning the device had to be able to produce meaningful levels of current density with a voltage between the two levels.

In addition to Ren and Yu, researchers on the paper include Qing Zhu, Shaowei Song, Brian McElhennyy, Dezhi Wang, Chunzheng Wu, Zhaojun Qin, Jiming Bao and Shuo Chen, all of UH; and Ying Yu of Central China Normal University.

This is more significant than one might first think as water clean enough to enter into the usual electrolysis process isn’t low cost. Then there is the value of the concentrated chemicals that the new catalyst may make in the process that could offer an offsetting value. Even more interesting is the catalyst components are all not noble rare earth elements or highly priced ones. There is lots more experimentation to be done, but for the hydrogen community this is immensely good news.


Comments

Name (required)

Email (required)

Website

Speak your mind

css.php