A Helmholtz-Zentrum Berlin team has now presented a method to visualize convection in the electrolyte and to reliably simulate it in advance with a multiphysics model. Hydrogen produced by using solar energy could contribute to a climate neutral energy system of the future. But there are hurdles on the way from laboratory scale to large-scale implementation.

Hydrogen can be produced with renewable energies in a climate neutral way and could make a major contribution to the energy system of the future. One of the options is to use sunlight for electrolytic water splitting, either indirectly by coupling a solar cell with an electrolyser or directly in a photoelectrochemical (PEC) cell. Light-absorbing semiconductors serve as photoelectrodes. They are immersed in an electrolyte solution of water mixed with strong acids or bases, which contains high concentration of protons or hydroxide ions necessary for efficient electrolysis.

However, in a large-scale plant, it would make sense for safety reasons to use an electrolyte solution with a near-neutral pH. Such a solution has a low concentration of protons and hydroxide ions, which leads to mass-transport limitations and poor performance. Understanding these limitations is essential to design a safe and scalable PEC water splitting device.

(a) Schematic of HZB’s in situ fluorescence pH monitoring setup, used to measure the pH distribution in an electrochemical cell during water splitting. Image Credit: Helmholtz-Zentrum Berlin. Click image for the largest view.

A team led by Dr. Fatwa Abdi from the HZB Institute for Solar Fuels has now for the first time investigated how the liquid electrolyte throughout the cell behaves during electrolysis.  The team’s research paper has been published in Energy & Environmental Science.

With the help of fluorescent pH-sensor foils, Dr. Keisuke Obata, a postdoc in Abdi’s team, determined the local pH value in PEC cells between the anode and cathode during the course of electrolysis. The PEC cells were filled with near-neutral pH electrolytes. The scientists experimentally visualized the decrease of pH at regions close to the anode and the increase of pH at regions close to the cathode.

Interestingly, they observed a clock-wise motion of the electrolyte as the electrolysis proceeds. The observation can be explained by buoyancy due to changes of electrolyte density during the electrochemical reaction which leads to convection. “It was surprising to see that tiny changes in electrolyte density (~0.1%) cause this buoyancy effect,” said Abdi.

In parallel, Abdi and his team developed a multiphysics model to calculate the convection induced by electrochemical reactions. “We have thoroughly tested this model and can provide now a powerful tool to simulate natural convection in an electrochemical cell with various electrolytes in advance,” said Abdi.

For the project Abdi has built up a “Solar Fuel Devices Facility” at HZB, which is part of the Helmholtz Energy Materials Foundry (HEMF), a big infrastructure open to other scientists as well. This study was also performed in collaboration with TU Berlin, within the framework of UniSysCat cluster of excellence.

“With this work we are expanding our materials science expertise with efforts on photoelectrochemical reactor engineering, which is an essential next step for the scale-up of solar fuel devices,” said Prof. Dr. Roel van de Krol, who heads the HZB Institute for Solar Fuels.

This work should prove to be major progress on the hydrogen production process that may well prove to be a real improvement for commercial production and may become useful for widely distributed production. For now most commercial hydrogen is sourced from natural gas, which isn’t what the green community is seeking. We’re still quite a way away from a rooftop solar hydrogen system, but this work should help engineers get closer to workable systems.


Comments

Name (required)

Email (required)

Website

Speak your mind

css.php