A technology developed at the U.S. Department of Energy’s Oak Ridge National Laboratory and scaled up by Vertimass LLC to convert ethanol into fuels suitable for aviation, shipping and other heavy-duty applications can be price-competitive with conventional fuels while retaining the sustainability benefits of bio-based ethanol, according to a new analysis.

Block flow diagram illustrating 1) water removal from wet ethanol vapor above the feed tray to produce pure fuel grade ethanol or 2) CADO of the same wet ethanol to fungible blendstocks. HE, heat exchangers. Image Credit: Oak Ridge National Laboratory. Click image for the largest view. More details at the study link below.

ORNL worked with technology licensee Vertimass and researchers at 10 other institutions on a technoeconomic and a life cycle sustainability analysis of the process – single-step catalytic conversion of ethanol into hydrocarbon blendstocks that can be added to jet, diesel, or gasoline fuels to lower their greenhouse gas emissions. This new technology is called Consolidated Dehydration and Oligomerization, or CADO.

The analysis, published in Proceedings of the National Academy of Sciences, showed that this single-step process for converting wet ethanol vapor could produce blendstocks at $2/gigajoule (GJ) today and $1.44/GJ in the future as the process is refined, including operating and annualized capital costs. Thus, the blendstock would be competitive with conventional jet fuel produced from oil at historically high prices of about $100/barrel. At $60/barrel oil, the use of existing renewable fuel incentives result in price parity, the analysis found.

The conversion makes use of a type of catalyst called a zeolite, which directly produces longer hydrocarbon chains from the original alcohol, in this case ethanol, replacing a traditional multi-step process with one that uses less energy and is highly efficient.

Zhenglong Li, staff scientist for biomass catalysis at ORNL and a collaborator on the project said, “The robustness of the catalyst enables direct conversion of wet ethanol, which greatly simplifies the process, reduces the cost of ethanol purification and makes hydrocarbon blendstock production costs competitive based on the analysis.”

While this single-step catalysis was effective at laboratory scale, further testing and improvements by Vertimass resulted in even higher product yields when scaled up 300 times using commercial catalyst formulations. The conversion operation could be integrated into new biofuels plants or installed as bolt-on technology to existing ethanol plants with minimal new capital investment, the researchers noted.

Advanced biofuels hold promise as clean-burning, carbon-neutral renewable energy sources. The goal is to create advanced liquid biofuels that can take advantage of existing pipeline delivery infrastructure and can be used in existing or advanced engines without loss of performance. The fuels are particularly attractive to help reduce net carbon emissions in heavy-duty engines such as those in aircraft, ships and large commercial vehicles where electrification is challenging.

Given current standards, the advanced biofuel could be blended at 20% with petroleum-derived jet fuel and somewhat higher for gasoline, subject to certification and verification.

Meanwhile, a life-cycle analysis of the conversion process found that its greenhouse gas emissions profile is similar to that for the ethanol fed to the process.

Brian Davison, chief science officer for DOE’s Center for Bioenergy Innovation (CBI) at ORNL and a collaborator on the project said, “The sustainability of bio-derived ethanol, now mostly produced from corn in the United States but with some now being made from corn stover and eventually dedicated biomass feedstocks like switchgrass, carries through with the catalytic process.” CBI is pursuing specific research targets for a thriving bioeconomy: sustainable biomass feedstock crops; advanced processes to break down and convert plants into specialty biofuels; and valuable bioproducts, including chemical feedstocks, made from the lignin residue after bioprocessing.

Refinements by Vertimass to the original, lab-scale process include the development of cheaper forms of the catalyst, as well as more than doubling the liquid fuel yield, the paper noted.

The paper details the refinements as well as results from analyses by Argonne National Laboratory, the National Renewable Energy Laboratory, Vertimass, and ORNL in collaboration with Dartmouth, the Federal Aviation Administration, Boeing, Pennsylvania State University, University of California-Riverside, Imperial College of London, the Brazilian Bioethanol Science and Technology Laboratory, and the Brazilian Center for Research in Energy and Materials.

Professor Lee Lynd of Dartmouth College, who collaborated on the research and is the corresponding author said, “This research shows how ethanol, in addition to being a valuable fuel for cars, can be an effective intermediate for sustainable production of low-cost fuels for air travel and heavy-duty vehicles. The integration of biological and catalytic technologies shown here reflects the power of such hybrid systems.”

Now that folks have gotten used to better automotive fuels with ethanol added, it will come as no surprise that technological progress is going to take this fuel source to new markets. More better cheaper!


Comments

Name (required)

Email (required)

Website

Speak your mind

css.php