Researchers at the Paul Scherrer Institute (PSI) and the ETH Zurich have collaborated to develop a ground-breaking process for making solar fuel. The new procedure uses the sun’s thermal energy to convert carbon dioxide and water directly into synthetic fuel.

The team has unveiled a chemical process that uses the sun’s thermal energy to convert carbon dioxide and water directly into high-energy fuels: a procedure developed on the basis of a new material combination of cerium oxide and rhodium.

The discovery marks a significant step towards the chemical storage of solar energy. The researchers published their findings in the research journal Energy and Environmental Science.  (Open access at this writing.)

Ivo Alxneit, chemist at the Solar Technology Laboratory, Paul Scherrer Institute, preps for an experiment. Together with fellow researchers at the PSI and the ETH Zurich, he has developed a procedure that uses solar energy to produce fuel. Image Credit: Paul Scherrer Institute/Markus Fischer. Click image for the largest view.

Ivo Alxneit, chemist at the Solar Technology Laboratory, Paul Scherrer Institute, preps for an experiment. Together with fellow researchers at the PSI and the ETH Zurich, he has developed a procedure that uses solar energy to produce fuel. Image Credit: Paul Scherrer Institute/Markus Fischer. Click image for the largest view.

Ivo Alxneit, chemist at the PSI’s Solar Technology Laboratory explained, “This allows solar energy to be stored in the form of chemical bonds. It’s easier than storing electricity. The new approach is based on a similar principle to that used by solar power plants.”

Alxneit and his colleagues use heat in order to trigger certain chemical processes that only take place at very high temperatures – above 1000 °C. Advances in solar technology will soon enable such temperatures to be achieved using sun light.

Alxneit’s research is based on the principle of the thermo-chemical cycle, a term comprising both the cyclical process of chemical conversion and the heat energy required for it – referred to by experts as thermal energy. Ten years ago, researchers had already demonstrated the possibility of converting low-energy substances such as water and the waste product carbon dioxide into energy-rich materials such as hydrogen and carbon monoxide.

That process works in the presence of certain materials such as cerium oxide, a combination of the metal cerium with oxygen. When subjected to very high temperatures above 1500 °C, cerium oxide loses some oxygen atoms. At lower temperatures, this reduced material is keen to re-acquire oxygen atoms.

Thus if water and carbon dioxide molecules are directed over such a cooled and activated surface, they release oxygen atoms. Water (H2O) is converted into hydrogen (H2), and carbon dioxide (CO2) turns into carbon monoxide (CO), whilst the cerium re-oxidizes itself in the process, establishing the preconditions for the cerium oxide cycle to begin all over again.

The hydrogen and carbon monoxide created in the process can be used to produce fuel: specifically, gaseous or fluid hydrocarbons such as methane, petrol and diesel. Such fuels may be used directly but can also be stored in tanks or fed into the natural gas grid.

Here’s the breakthrough. Up to now, this type of fuel production required a second, separate process known as the Fischer-Tropsch Synthesis, developed in 1925. The European research consortium SOLAR-JET recently proposed a combination of a thermo-chemical cycle and the Fischer-Tropsch procedure.

However, as Alxneit explains, “Although this basically solves the storage problem, considerable technical effort is necessary to carry out a Fischer-Tropsch Synthesis.” In addition to a solar installation, a second industrial-scale technical plant is required.

By developing a material that allows the direct production of fuel within one process, the new approach developed by Ivo Alxneit and his colleagues dispenses with the Fischer-Tropsch procedure entirely and hence also with the second step.

This was accomplished by adding small amounts of rhodium to the cerium oxide. Rhodium is a catalyst that enables certain chemical reactions. It has been known for some time that rhodium permits reactions with hydrogen, carbon monoxide and carbon dioxide.

Alxneit said, “The catalyst is a pivotal research topic for the production of these solar fuels.”

PhD candidate at the PSI Fangjian Lin, who works with Alxneit, emphasized “It was a huge challenge to control the extreme conditions necessary for these chemical reactions and develop a catalyst material capable of withstanding an activation process at 1500° C.” During the cooling process, for example, the extremely small rhodium islands on the material surface must not be allowed to disappear or increase in size since they are essential to the anticipated catalytic process.

The resulting fuels are either used or stored and the cyclical process begins again once the cerium oxide is heated and re-activated.

Using various standard methods of structure and gas analysis, researchers working in laboratories at the PSI and the ETH in Zurich examined the cerium-rhodium compound, explored how well the reduction of the cerium oxide works and how successful was the methane production.

Alxneit concluded, “So far, our combined process only delivers small amounts of directly usable fuel. But we have shown that our idea works and it’s taken us from the realms of science fiction to reality.”

During their experiments, researchers kept things simple by using a high performance oven at the ETH in place of solar energy.

Matthäus Rothensteiner, PhD-candidate at the PSI and the ETH Zurich whose area of responsibility included these tests explained, “In the test phase, the actual source of thermal energy is immaterial.”

Jeroen van Bokhoven, head of the PSI’s Laboratory for Catalysis and Sustainable Chemistry and Professor for Heterogeneous Catalysis at the ETH Zurich summed up saying, “These tests enabled us to gain valuable insights into the catalyst’s long-term stability. Our high performance oven allowed us to carry out 59 cycles in quick succession. Our material has comfortably survived its first endurance test.”

Having shown that their procedure is feasible in principle, researchers can now devote themselves to its optimization.

One has the impression that the Europeans are very serious on getting non-fossil sourced fuels technology into business. This effort and the one posted just last week on July 5 both show highly possible processes that could scale up and make a dent into the fossil fuel market. Not that these ideas are going to upend the petroleum industry, but much like base load electrical generation these technologies could be the basic supply of storable fuels someday, offering a fuel supply with out the wild ups and downs of the oil and gas markets.


Comments

Name (required)

Email (required)

Website

Speak your mind

css.php