This sort of thing drives physicists nuts. Today we’ll look at another electric motor that is engineered and constructed so that the electricity coming in added to what I suppose must be some of the atomic magnetic force of the permanent magnets, is alleged to put out more power than goes in.

These things have come before and mystified physicists and lay people alike. This time Herman Wilt of Vidalia Georgia has a working model to confound the researchers. The device reported to be at Georgia Tech University for testing. Meanwhile Mr. Wilt is working to configure the device so it self powers with excess output left over for work. The device is said to be the result of 20 years of investigation and study by Mr. Wilts, his wife’s introspection and other contributors.

With the patent granted (PN/7291944) the concept can be discussed in some detail. Electric motors are set of magnets, one set outside the inner set that turns. By timing the north and south poles of the magnets the attractions and repulsions can be made to get the motor to turn. The outer magnets are fixed to the motor’s shell and the inner magnets are fixed to the turning rotor.

Mr. Wilts motor is described as, “An electromagnetic engine has an inner rotor and an outer rotor having magnets of opposite polarity mounted thereon. Output is taken from the inner rotor, which is free to rotate in a single direction. The outer rotor is caused to oscillate, the force of magnetic repulsion between the magnetic fields of the inner and outer rotors driving rotation of the inner rotor. The outer rotor may be held stationary by solenoids and holding gears when the inner and outer magnetic fields are closely adjacent in order to maximize the force of repulsion. The timing of the oscillation and pausing of the outer rotor may be controlled by EPROM circuitry and a timing sensor mounted on the output shaft or gear.”

The difference in simple terms is that the outer magnets are moving too, and the motion is set out to enhance the magnetic attractions and repulsions. As they move through an oscillation cycle they add to the proximity and total time an attraction/repulsing event takes place. On the other hand, I could be completely wrong about what I read and see in the videos.

Mr. Wilts explains the basic motor.

A little more explanation and comparison of the first and third models.

These are obviously complex and precise machines that if the assertions prove to be true would bring about quite a change in the use of electricity. The videos are fairly good as YouTube vids go and the patent is certainly for real.

This is another marvel of ingenuity that fascinates and stimulates the mind. It also provides a puzzle to solve or a mystery to unravel. It will be interesting to see the test results should Georgia Tech’s test results make news.

I wish Mr. Wilt and his group a big success.


3 Comments so far

  1. PWE on February 3, 2009 4:21 PM

    “He says the difference in this motor and others is it actually uses less energy the harder it runs”

    So, in other words, there is a theoretical load that could be applied to the motor that would require zero input power. This also implies that any load greater than that will cause the motor to generate excess energy.
    Put another way. Hook this motor up to an immovable object, also known as an infinite load. Based on the quoted statement, you should then be able to get an infinite amount of power out.

    Who can tell me how many laws of physics this contradicts?
    Or possibly you have to apply insane troll logic.

  2. educational grants on November 8, 2010 9:01 AM

    Do you people have a facebook fan page? I looked for one on twitter but could not discover one, I would really like to become a fan!

  3. alpharmash on November 27, 2010 5:58 AM

    I just signed up to your blogs rss feed. Will you post more on this subject?

Name (required)

Email (required)


Speak your mind