Sep

27

Organic Polymers Use Sunlight to Make CO2 Into Alcohol Fuel

September 27, 2016 | Leave a Comment

University of Texas at Arlington chemists have been the first to demonstrate that an organic semiconductor polymer called polyaniline is a promising photocathode material for the conversion of carbon dioxide into alcohol fuels without the need for a co-catalyst.

Principal researcher Krishnan Rajeshwar, UTA distinguished professor of chemistry and biochemistry and co-Director of UTA’s Center for Renewable Energy, Science & Technology said, “This opens up a new field of research into new applications for inexpensive, readily available organic semiconducting polymers within solar fuel cells.”

Image Credit: Professor Krishnan Rajeshwar, University of Teaxas Arlington. Click image for the largest view.

Image Credit: Professor Krishnan Rajeshwar, University of Texas Arlington. Click image for the largest view.

“These organic semiconducting polymers also demonstrate several technical advantages, including that they do not need a co-catalyst to sustain the conversion to alcohol products and the conversion can take place at lower temperatures and use less energy, which would further reduce costs,” Rajeshwar added.

Rajeshwar and his co-author Csaba Janaky, professor in the Department of Physical Chemistry and Materials Science at the University of Szeged, recently published their findings in The Royal Society of Chemistry journal ChemComm as “Polyaniline films photoelectrochemically reduce CO2 to alcohols.”

In this proof-of-concept study, the researchers provide insights into the unique behavior of polyaniline obtained from photoelectrochemical measurements and adsorption studies, together with spectroscopic data. They also compared the behavior of several conducting polymers.

The stationary currents recorded after two hours during testing suggests that the polyaniline layer maintained its photoelectrochemical efficacy for the studied time period. While in the gas phase, only hydrogen was detected, but potential fuels such as methanol and ethanol were both detected in the solution for carbon dioxide-saturated samples.

Rajeshwar added, “Apart from these technical qualities, as a polymer, polyaniline can also be easily made into fabrics and films that adapt to roofs or curved surfaces to create the large surface areas needed for photoelectrochemical reduction, eliminating the need for expensive and dangerous solar concentrators.”

Frederick MacDonnell, chair of UTA’s Department of Chemistry and Biochemistry, underlined the importance of this research in the context of UTA’s focus on global environmental impact within the Strategic Plan 2020: Bold Solutions|Global Impact.

“Dr. Rajeshwar’s ongoing leadership in research around new materials for solar fuel generation is vital in a world where we all recognize the need to reduce the impact of carbon dioxide emissions,” MacDonnell said. “Finding an inexpensive, readily-available photocathode material could open up new options to create cheaper, more energy-effective solar fuel cells.”

This is at the proof of concept stage, which is the place where things start. The technology has some unanswered questions such as the concentration of the CO2 during the experiments. There will lots more.

Yet the idea has a certain warm fuzzyness about it. A home sized unit, if atmospheric concentrations will work, could replace the hot water and home heating draw of natural gas or propane. An industrial plant may find a market for its CO2 effluent and many more ideas can motivate development.

The tech hinges on practicality. Proof of concept, its starting – how far it can go is anyone’s guess for now.


Comments

Name (required)

Email (required)

Website

Speak your mind

css.php