A University of Maine engineer and his research team have discovered a revolutionary new chemical process can transform forest residues, along with other materials such as municipal solid waste, grasses, and construction wastes into hydrocarbon fuel oil products.

Shortening up the process from biomass to hydrocarbons has long been an idea of intense interest, and usually skipped over to the easier fermentation, pyrolysis and other schemes to get molecular change.

Maine is driven by circumstances, a lot of wood, some 6 million green tons of additional available biomass, according to a 2008 Maine Forest Service Assessment of Sustainable Biomass Availability.  The new process suggest the biomass could yield 120 million gallons per year of gasoline, diesel, heating oil and kerosene mixtures while providing all the steam and power needs of the processing plants.

The whole of the U.S. transportation industry, which is dependent on hydrocarbon fuels because of their high energy density, could benefit from the revolutionary finding.

The new process was developed by M. Clayton Wheeler, a UMaine associate professor of chemical and biological engineering, and undergraduate students in his lab.  Based on a mixed-carboxylate platform, the fuel has been determined to have a number of properties that make it better suited to serve as a drop-in fuel than many alternative fuels being widely researched and, bravely suggested, even those currently on the market.

In an early round of analysis, the UMaine oil product was found to have boiling points that encompass those of jet fuel, diesel, and gasoline. Further refinement to meet emissions standards would be needed in order to use the UMaine oil in vehicles that drive on public ways, but Wheeler believes the oil can be refined as simply as any other current oil at a standard refinery.

The process creating the oil is known as thermal deoxygenation (TDO) is relatively simple, Wheeler says, and will work on the cellulose found in wood or other substances that contain cellulose or carbohydrates and the process requires no catalysts or hydrogen, and is “a spin on chemistry used to make acetone back in the 1800s.”

Wheeler says, “The process is unique. No one else in the world is doing this.”

The TDO process starts with the conversion of cellulose to organic acids. The acids are combined with calcium hydroxide to form a calcium salt. That salt is heated to 450 degrees Celsius (900 degrees Fahrenheit) in a reactor, which constantly stirs the salt. This produces a reaction resulting in a dark amber-colored oil.

Here it gets very interesting -the reaction removes nearly all of the oxygen from the oil, which is a key step that distinguishes TDO from other biofuel processes. Oxygen is removed from as both carbon dioxide and water, and without the need for any outside source of hydrogen to remove the oxygen. Therefore, most of the energy in the original cellulose source is contained in the new oil.

The research paper, free with a registration, is titled “Energy Densification of Levulinic Acid by Thermal Deoxygenation,” at Green Chemistry.

Wheeler explains, “Biomass has a lot of oxygen in it. All of that oxygen is dead weight and doesn’t provide any energy when you go to use that as a fuel. If you’re going to make a hydrocarbon fuel, one of the things you have to do is remove oxygen from biomass. You can do it by using hydrogen, which is expensive and also decreases the energy efficiency of your process. So if there’s a way to remove the oxygen from the biomass chemically, then you’ve densified it significantly.  Our oil has less than 1 percent oxygenates. No one else has done anything like this. ”

Wheeler’s lab team recently used unpurified, mixed carboxylates, which were produced from grocery store waste such as banana peels, cardboard boxes and shelving to successfully make a batch of the fuel. The use of municipal solid waste illustrates another important point about the potential of the UMaine fuel – it does not require an uncontaminated cellulose source, which makes the TDO process and resulting oil even more attractive. Many other pathways to hydrocarbons require purified feedstocks or intermediates, which adds more complexity and cost to their processes.

“You don’t need pure wood or pure cellulose,” says Wheeler. “Anytime you can use something without having to separate it, your costs go down.”

Wheeler and his team already have the ability to produce several liters of the fuel per month in the laboratory. The process can be scaled up using equipment and chemicals commonly found in facilities such as some pulp mills.

This has to snap around the minds of very large alternative fuel users.  If it will scale up a major city’s municipal waste could offer a medium size oil company a very large continuous supply of raw oil for refining.  It should also put an attractive value in the garbage and trash.  Imagine people not pitching out the trash or picking it up for some extra money.

It may also scale to local area farm cooperatives that could pop up worldwide.  The potential here is incredible.

This is a major congratulatory event for UMaine, Wheeler and the team.


Comments

6 Comments so far

  1. Jagdish on October 29, 2011 3:26 AM

    Crux of the process is conversion of biomass or other organic matter to carboxylic acids. The rest is chemical engineering.
    It is not clear if the basic process is bio-chemistry, hydrolysis or hydrous pyrolysis.

  2. Revolutionary New Process Turns Biomass Waste into Fuel Oil | Alternative Energy – Solar PV – Heat Pumps – Renewables on October 31, 2011 10:33 PM

    [...] A University of Maine engineer and his research team have discovered a revolutionary new chemical process that can transform forest residues, along with other materials such as municipal solid waste, grasses, and construction wastes into hydrocarbon fuel oil products. (UMaine News Release here) [...]

  3. Revolutionary New Process Turns Biomass Waste into Fuel Oil | RefineryNews.com on November 1, 2011 7:41 AM

    [...] A University of Maine engineer and his research team have discovered a revolutionary new chemical process that can transform forest residues, along with other materials such as municipal solid waste, grasses, and construction wastes into hydrocarbon fuel oil products. (UMaine News Release here) [...]

  4. BP business clams on March 25, 2012 9:38 PM

    If some one needs to be updated with latest technologies then he must be pay a
    quick visit this web page and be up to date every
    day.

  5. LUKAS on May 23, 2012 12:02 AM

    BRAVO,DR. WHEELER N ASSOCIATES FROM UMAINE UNIVERSITY.

    IF BY ECONOMIC AND BENEFITING THE WORLD QUICKLY,
    UMAINE UNIVERSITY IS READY TO TRANSFER THE TECHNOLOGY TO ME FOR MY COUNTRY, INDONESIA,KINDLY CONSIDER ME AS ONE OF THE BUYER OR SMALL INVESTOR OF THE TECHNOLOGY.

    FOR THE GOOD SAKE OF THE WORLD AND INDONESIA, MY LOVELY BELOVED COUNTRY.

    BRAVO UNITED STATES OF AMERICA.

    LUKAS ZAILANI @ 62-21-95182009 (Mobile Cell Phone).

  6. pyrolysis plant on January 16, 2013 7:50 AM

    good

Name (required)

Email (required)

Website

Speak your mind