Blest, a Japanese company has invented a safe and user-friendly machine that can convert plastic back to oil. The machine is effective in recycling different kinds of plastic into oil.

Plastic is one of the most versatile synthetically produced materials in the world and is also one of the environmentally unfriendly substances produced by man.  Considering its utility in myriad of industries and life spheres, it seems impossible to give up plastic entirely.

Consider this – a single plastic bottle takes about 1,000 years to break down completely.  Plastics pose a difficult problem from the manner in which it is disposed.  The fact is plastic unlike some other materials cannot be recycled easily. Typically manufactured from petroleum, its estimated that about 7 percent of the entire world’s oil production in a year is used for plastic manufacturing. That’s higher than the oil consumption of Africa. Plastic’s recycle rate around the globe is dismally low; its carbon footprint includes incineration and land filling. Plastic trash is also causing major litter and pollution on beaches and oceans around the world. Tons of plastic from Japan and U.S. are floating in the Pacific Ocean, which significantly endangers marine life.

According to the data released by Plastic Waste Management Institute – effective utilization doesn’t just take into account the 20 percent of currently recycled plastic. But it also considers the incinerated 52 percent used for energy recovery like generating electric power or heat.

Akinori Ito, CEO of Blest said, “If we burn the plastic, we generate toxins and a large amount of CO2. If we convert it into oil, we prohibit CO2 production and at the same time, increase people’s awareness about the value of plastic garbage”.

The Blest machine employs an electric heater that controls temperature instead of flame making the conversion technology is quite safe.  The machines are capable of recycling polystyrene, polyethylene and polypropylene of numbers 2 to 4. PET bottles that fall under number 1 polypropylene, however, won’t work and cannot be processed.

The process result is crude gas is that can be effectively used to fuel stoves or generators. Processed with more refinement, the gas products can be upgraded to a gasoline substitute.

One kilogram (about 2.2 pounds) of plastic using 1 kilowatt of electricity is capable of producing 1 liter (a little more than a quart) of oil. This costs approximately 20 cents or less than 80¢ per gallon at Japan’s electric rates.

Blest manufactures these machines in different sizes and so far had installed them at 60 places including fisheries, farms, small factories of Japan and abroad. “To make a machine that anyone can use is my dream,” says Ito. “The home is the oil field of the future.” Considering the fact that 30 percent of household waste in is plastic — majority of it coming from packaging — Ito’s statement is definitely not as crazy as it seems. At present, the smallest version of the machine is priced at $9,500US. The company is constantly honing its technology and looking forward to achieve a product that can be made available in poorest nations of the world.  These prices don’t involve mass production.

Ito is a bit of a campaigner.  He seems passionate about the educational aspect of the machine.  Ito has taken the model on many trips by plane to the Marshall Islands. There, he worked in conjunction with the schools and local government to educate people about the culture of recycling and the great value of useless plastic. Ito did it as a part of a project he took up a few years back. The program succeeded and it also offered a practical solution to get rid of plastics left by tourists. The oil manufactured is used for running boats and tourist buses.

For Ito, introducing the recycling concept to school children, their parents and teachers is his most important work. In Japan he demonstrates to them how drinking straws and packaging left over after lunch could be recycled. He also adds that if we were to use oil from the plastic rather than crude oil, the world’s CO2 emission could be dramatically slashed. He sarcastically questions the world “Its waste, isn’t it? This plastic is everywhere in the world and everyone throws it away.”

The problem with plastic is that when you through it away it doesn’t reform anytime soon.  Ito’s Blest offers at a remarkable low cost a way for communities to get some value for a problem that if left unanswered will get very large as more time and consumption goes by.  Some say there is a mountain of plastic out there and the mountains so far over much of the world aren’t getting any smaller.

The info offered doesn’t discuss that the process remains are, an ash, tar or other substance.  With a short list of plastics that work, perhaps the conversion nears 100%.  For those in search of a solution to cleaning up the plastics, be it the scenery or a landfill, a look at Blest is worthwhile, one might actually make some money for the trouble.

Not all plastic has a short useful life.  Of the 7% of crude going to plastic some stays in place years or decades.  But if recycling were customary another 7% of supply would gradually appear for the transport fuel market driving another demand wedge into crude oil’s price.


Comments

11 Comments so far

  1. teacupkittens on November 11, 2010 8:25 PM

    Oil is always going to be a big problem for everyone as it costs alot quantity will not last forever. I hope this invention will be used everywhere as it helps both, mother earth and us.

  2. Matt Musson on November 12, 2010 11:01 AM

    The ideal plant would produce Diesel oil. I would buy one for that!

  3. Clara Ellie on December 22, 2010 2:28 AM

    Oooh, you’re such an inspiration. I love this blog!

  4. JIM on January 3, 2011 7:44 PM

    I would really like to see more info and maybe some in depth demonstrations of this technology. I think it could be a great asset to anyone in the recycling business.

  5. Phill on November 25, 2011 1:46 PM

    Great idea… and a further idea on how to save energy is to use methane from sewage treatment as an energy source to heat and crack the plastic. This will use otherwise waste energy (most methane is burned off at the site) and reduce the energy demand further. So, win-win-win.

  6. Andy on December 5, 2011 3:36 PM

    I am very interested in the Blest Machines. What I am interested in is: How do the calculations look for comparing the energy saved by not producing virgin oil for fuel to the energy used for making virgin plastic rather than recycling plastic to make new plastic?

  7. arun agrawal on December 12, 2011 8:22 AM

    i am intreasted in ito pvc to fuel machine plz give me contact no and address of blest.

    thank’s
    arun agrawal

  8. Karl T. Lee on February 12, 2012 6:59 PM

    I would like to know more, how much can your machine convert into oil in an hour

  9. Siddharth on November 26, 2012 8:07 AM

    Hello,
    The concept made by you is really appreciable and helpful to preserve the nature.
    I would be glad if you could help me with some more details of the same.

    regards,
    Siddharth.

  10. Athanasios Charalabopoulos on December 1, 2012 5:39 AM

    Dear Sirs,

    I’d like to send any information about the apparatus and also the formula of supplying in Greece.

    With respect

    Athanasios Caharalabopoulos

  11. lynvic on January 23, 2013 11:15 PM

    i want to know what is the price of that machine?

Name (required)

Email (required)

Website

Speak your mind